Pelco DX1004-30 4 Channel Security DVR
The Pelco DX1004 is a four channel digital video recorder, the system has been on the market for some time now, video is stored on its 30-gigabyte internal hard drive. The DVR has quad functionality allowing you to monitor all cameras attached to the system simultaneously on one monitor. The DX1004 is compatible with NTSC video signals and has BNC ports used for attaching your security cameras to the system.
At maximum the DVR has the ability to record surveillance camera footage at a speed of 30 frames per second, the system can display video at a maximum resolution of 352*240. The DVR uses MPEG video compression and it has two video outputs, one of these is for connecting the device to a monitor while the other can be used for connecting a video printer to the system.
It’s possible to set the DVR to record surveillance camera footage continuously or you can set a schedule that determines when it will start and stop recording. External alarms can be connected to the DVR and the system will begin recording when it detects an alarm has been activated. To accommodate external alarms the DVR is fitted with four alarm inputs, there is also one alarm output that can be used to activate an alarm when the system experiences specific events.
As mentioned the DX1004 has been around now for some time, because of this it lacks some of the features found on today’s systems such as an Ethernet port connecting the device to a network. On top of this you don’t have the option to play back surveillance camera footage and recording with the DVR simultaneously. The system does have a password protection system and is a fairly low cost option for adding a surveillance system to your premises but today Pelco offer much better security recorders.
Check the latest price on the Pelco DX1004-30 4 Channel Security DVR
No Comments, Comment or Ping
Reply to “Pelco DX1004-30 4 Channel Security DVR”